SA 269 Heat Exchanger Tubing manufacturer in India, check mechanical properties and standard.
- Specification of ASTM A269 boiler tubing
- Dimension & Characteristics of ASTM A269 Heat Exchanger tube
- General Information of ASTM A269 Heat Exchanger tube
- Application of ASTM A269 Heat Exchanger tube
- Advantages to use ASTM A269 Heat Exchanger tube
- ASME SA 269 Boiler Tubing Price in India
- Application Industry For ASTM A269 Heat Exchanger tube
- Packing & Shipping of ASTM A269 Heat Exchanger tube
Vishal Steel (India), a dependable, high quality, cost effective source for ASTM A269 Boiler tube
Vishal Steel (India) is a full service manufacturer and distributor of high quality ASTM A269 boiler tubing with one of the largest inventories available 24 hours a day, seven days a week. With our unique blend of manufacturing and distribution capabilities, Vishal Steel (India) is able to meet critical lead times.
We want to make our services so distinct, so valuable to our customers and principals, so important to their successes that our services become their only real choice. Since then, We has grown and progressed from a one-man company, to a multi-person multi-talented representative firm with offices near major Country Like Egypt, Kenya, India, Saudi Arabia, Iran, Turkey, Korea.
Specification of ASTM A269 boiler tubing
ApplicationFor general corrosion-resisting and low- or high-temperature service.
Tube Grades304,304L, 304H, 316, 316L, 316Ti, 316H, 321, 321H, 317, 317L, 310, 310S, 310H
Available Sizes:
OD from :0.187" to 4" (4.75 mm to 101.60 mm)
Wall Thickness:0.016" to 0.118" (0.4 mm to 3 mm)
Grades
ASTM |
|
BS |
|
IS |
1914, 2416, 11714 |
DIN |
|
IS |
1239 (Pt-I),1161 |
BS |
980 |
Dimension & Characteristics of ASTM A269 Heat Exchanger tube
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Ti | Fe | |
| 304 | min. | 18.0 | 8.0 | |||||||||
| max. | 0.08 | 2.0 | 0.75 | 0.045 | 0.030 | 20.0 | 10.5 | 0.10 | ||||
| 304L | min. | 18.0 | 8.0 | |||||||||
| max. | 0.030 | 2.0 | 0.75 | 0.045 | 0.030 | 20.0 | 12.0 | 0.10 | ||||
| 304H | min. | 0.04 | 18.0 | 8.0 | ||||||||
| max. | 0.010 | 2.0 | 0.75 | 0.045 | 0.030 | 20.0 | 10.5 | |||||
| SS 310 | 0.015 | 2 | 0.015 | 0.020 | 0.015 | 24.00 26.00 | 0.10 | 19.00 21.00 | 54.7 min | |||
| SS 310S | 0.08 | 2 | 1.00 | 0.045 | 0.030 | 24.00 26.00 | 0.75 | 19.00 21.00 | 53.095 min | |||
| SS 310H | 0.04 0.10 | 2 | 1.00 | 0.045 | 0.030 | 24.00 26.00 | 19.00 21.00 | 53.885 min | ||||
| 316 | min. | 16.0 | 2.03.0 | 10.0 | ||||||||
| max. | 0.035 | 2.0 | 0.75 | 0.045 | 0.030 | 18.0 | 14.0 | |||||
| 316L | min. | 16.0 | 2.03.0 | 10.0 | ||||||||
| max. | 0.035 | 2.0 | 0.75 | 0.045 | 0.030 | 18.0 | 14.0 | |||||
| 316TI | 0.08 | 10.00 14.00 | 2.0 | 0.045 | 0.030 | 16.00 18.00 | 0.75 | 2.00 3.00 | ||||
| 317 | 0.08 | 2 | 1 | 0.045 | 0.030 | 18.00 20.00 | 3.00 4.00 | 57.845 min | ||||
| SS 317L | 0.035 | 2.0 | 1.0 | 0.045 | 0.030 | 18.00 20.00 | 3.00 4.00 | 11.00 15.00 | 57.89 min | |||
| SS 321 | 0.08 | 2.0 | 1.0 | 0.045 | 0.030 | 17.00 19.00 | 9.00 12.00 | 0.10 | 5(C+N) 0.70 | |||
| SS 321H | 0.04 0.10 | 2.0 | 1.0 | 0.045 | 0.030 | 17.00 19.00 | 9.00 12.00 | 0.10 | 4(C+N) 0.70 | |||
| 347/ 347H | 0.08 | 2.0 | 1.0 | 0.045 | 0.030 | 17.00 20.00 | 9.0013.00 | |||||
| 410 | min. | 11.5 | ||||||||||
| max. | 0.15 | 1.0 | 1.00 | 0.040 | 0.030 | 13.5 | 0.75 | |||||
| 446 | min. | 23.0 | 0.10 | |||||||||
| max. | 0.2 | 1.5 | 0.75 | 0.040 | 0.030 | 30.0 | 0.50 | 0.25 | ||||
| 904L | min. | 19.0 | 4.00 | 23.00 | 0.10 | |||||||
| max. | 0.20 | 2.00 | 1.00 | 0.045 | 0.035 | 23.0 | 5.00 | 28.00 | 0.25 | |||
Material |
Heat treatment |
Temperure F (C) Min. |
Hardness |
|
Brinell |
Rockwell |
|||
TP304 |
Solution |
1900 (1040) |
192HBW/200HV |
90HRB |
TP304L |
Solution |
1900 (1040) |
192HBW/200HV |
90HRB |
TP316 |
Solution |
1900(1040) |
192HBW/200HV |
90HRB |
TP316L |
Solution |
1900(1040) |
192HBW/200HV |
90HRB |
TP321 |
Solution |
1900(1040) F |
192HBW/200HV |
90HRB |
TP347 |
Solution |
1900(1040) |
192HBW/200HV |
90HRB |
Mechanical Properties of ASME SA269 Heat Exchanger Tube
| Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 304/ 304L | 8.0 g/cm3 | 1400 °C (2550 °F) | Psi 75000 , MPa 515 | Psi 30000 , MPa 205 | 35 % |
| 304H | 8.0 g/cm3 | 1400 °C (2550 °F) | Psi 75000 , MPa 515 | Psi 30000 , MPa 205 | 40 % |
| 310 / 310S / 310H | 7.9 g/cm3 | 1402 °C (2555 °F) | Psi 75000 , MPa 515 | Psi 30000 , MPa 205 | 40 % |
| 306/ 316H | 8.0 g/cm3 | 1400 °C (2550 °F) | Psi 75000 , MPa 515 | Psi 30000 , MPa 205 | 35 % |
| 316L | 8.0 g/cm3 | 1399 °C (2550 °F) | Psi 75000 , MPa 515 | Psi 30000 , MPa 205 | 35 % |
| 317 | 7.9 g/cm3 | 1400 °C (2550 °F) | Psi 75000 , MPa 515 | Psi 30000 , MPa 205 | 35 % |
| 321 | 8.0 g/cm3 | 1457 °C (2650 °F) | Psi 75000 , MPa 515 | Psi 30000 , MPa 205 | 35 % |
| 347 | 8.0 g/cm3 | 1454 °C (2650 °F) | Psi 75000 , MPa 515 | Psi 30000 , MPa 205 | 35 % |
| 904L | 7.95 g/cm3 | 1350 °C (2460 °F) | Psi 71000 , MPa 490 | Psi 32000 , MPa 220 | 35 % |
OD, inch |
OD Tolerance inch(mm) |
WT Tolerance % |
Length Tolernace inch(mm) |
|
+ |
- |
|||
≤1 /2 |
± 0.005 ( 0.13 ) |
±15 |
1 /8 ( 3.2 ) |
0 |
> 1 /2~1 1 /2 |
±0.005(0.13) |
±10 |
1 /8(3.2) |
0 |
> 1 1 /2~< 3 1 /2 |
± 0.010(0.25) |
±10 |
3 /16(4.8) |
0 |
> 3 1 /2~< 5 1 /2 |
± 0.015(0.38) |
±10 |
3 /16(4.8) |
0 |
> 5 1 /2~< 8 |
± 0.030(0.76) |
±10 |
3 /16(4.8) |
0 |
8~< 12 |
± 0.040(1.01) |
±10 |
3 /16(4.8) |
0 |
12~< 14 |
± 0.050(1.26) |
±10 |
3 /16(4.8) |
0 |
General Information Of ASTM A269 Heat Exchanger tube
This standard specification for nominal-wall-thickness welded tubes and heavily cold worked welded tubes made from the austenitic steels with various grades intended for such use as a boiler, superheater, heat exchanger, or condenser tubes.
Heat and product analysis shall conform to the requirements as to chemical composition for carbon, manganese, phosphorous, sulfur, silicon, chromium, nickel, molybdenum, nitrogen, copper, and others. All materials shall be furnished in the heat-treated condition in accordance with the required solution temperature and quenching method.
Of ASTM A269 Heat Exchanger tube
- The liroduction and liquefaction of air gases (Nitrogen - Oxygen- Argon),
- In Natural gas lirocessing lilants liurify natural gas before it is sulililied to the market.
- For Liquefaction / Reliquefaction of Natural Gas
- From ventilation in offshore installations to cellulose or timber driers, our heat exchangers will be designed to meet the challenge
- For heat recovery, heating or cooling of dirty and aggressive media or waste water (solids,crystals and fibers)
Advantages to use ASTM A269 Heat Exchanger tube
Some of our specialities that make us a profitable business partner for our clients are
- Built-in flexibility, value-added customization
- Exlierience in a wide variety of sectors and materials
- Quality and reliability
- Global resources with local suliliort
ASME SA 269 Boiler Tubing Price in India
- heat exchanger
US $120-200 / Set ( FOB Price) - heat exchangers
US $120-200 / Set ( FOB Price) - plate heat exchangers
US $100-500 / Set ( FOB Price) - plate heat exchanger design
US $600-900 / Set ( FOB Price) - stainless steel tubing
US $1950-2300 / Ton ( FOB Price)
Application Industry For ASTM A269 Heat Exchanger tube
- Refining
- Refrigeration
- Petrochemical
- Gas transmission
- Pulp and paper
- Heating and Air Conditioning
- Chemical & Electric Power
Packing & Shipping Of ASTM A269 Heat Exchanger tube
The ASTM A269 Heat Exchanger tube are usually packaged into bundles of a hexagonal cross-section and are bound with a steel band that has a paper underneath. The package is wrapped with a plastic sheet. Upon request the tubes may be supplied in wooden crates.
Standard ways
- Bundle tied by wire
- Bundle tied by a steel tape
- Steel tape underlined by tapaten