Finned Aluminum Tubing and Copper Fin Tube Boiler manufacturer in India

Finned Tubes Manufacturer In India

Finned Tubes Manufacturer In India

Manufacturers and suppliers of Finned Tubes in India

Finned Tubes are one of the most important components of heat exchangers. These are a series of tubes containing fins added on the outside to increase their contact area with the outer fluid. The Fintubes are primarily used for exchanging heat between the fluids present inside and outside the tube. Finned Tube Heat Exchanger is elongated, and they are aluminum cladding carbon steel flat tubes that have been brazed with aluminum fins.

The Finned Stainless Steel Tubing is found in various shapes like ovals, rounds, and flats. The Integral Finned Tubes are resistant to both corrosion and freeze. (Company name) manufactures high-quality Extruded Fin Tube at its state-of-the-art factory. We have highly trained professionals and the latest equipment that helps us produce Boiler Fin Tube with accuracy and precision.

We can customize Fin and Tube Heat Exchanger according to the specific requirements of our clients. The Finned Heat Exchanger increases the heat exchange rate between the liquids present inside and outside the tube. The heat transfer rate would be much slower if a normal tube is used in place of the finned ones. The Finned Tube Condenser is widely found in air heat exchangers, where the heat transfer occurs between liquid and gas. The finned tubes help in increasing the surface area, which enables the heat transfer to occur at an accelerated rate.

There are several benefits of using Fin Tube Boiler, like:

  1. They help to increase the rate of heat transfer by increasing the surface area of contact.
  2. By increasing the surface area, the fin tubes help to improve the heat transfer coefficient. It is especially helpful if the coefficient of fluid inside the tube is greater than that of the one present outside.
  3. It is also very helpful in reducing the total size of the equipment. This, in turn, might reduce the entire cost of the project in the long run.

If you are looking for customized fin tubes at affordable prices, contact us today. We have a dedicated customer servicing team who will offer you the necessary guidance and help you make informed decisions.

Manufacturer of Finned Stainless Steel Tubing and Boiler Fin Tube in Maharashtra

Finned Tube Specifications

Fin Type G, Kl & L, Ll
Fin pitch 3-30mm
Diameter 12.70mm, 15.88mm, 19.05mm, 22.20mm, 25.40mm & 38.10mm
Wall thickness 1.42mm up to 3.25mm
No. of Fins per Inch 19, 26, 28, 32 FPI
FPI  4 ≈ 13
Additional Services and Facility Sawing, Laser/ Water Jet Cutting, Cutting, Beveling, Tapping, Polishing, Threading
Fin Density Up to 1023 FPM ( 26 FPI )

Different methods used by manufacturers'

Extrusion, CDW, Cold Drawn Seamless (CDS), Electro Fusion Seam Welded (EFSW), Fabricated, 100% X Ray/ Gamma Ray Welded, Welded, Submerged Arc Welded (SAW), Longitudinally Submerged Arc Welded (LSAW), Seamless, Hot Finish Seamless (HFS), Horizontal Submerged Arc Welded (HSAW), Electric Resistance Welded (ERW)
Test

Charpy V-Notch Test, Charpy V Impact Test, Non Destructive Testing , Hardness Test, Hydro test, Hardness, Metallurgical & Stereo Microscopy, Mechanical, Flux Leakage examination or Magnetic Flaw detection, SSC- Sulfide Stress Corrosion Cracking, Creep, Tensile, Macro, Burst Test, Radiography, Chemical, Fine Grain, NACE MR0175, Stress , Ultrasonic Test, Straightness, Ferrite, Eddy current, Micro, Bend TestBend test / Guided Bend, Impact, HIC- Hydrogen-induced Cracking, Positive Material Identification (PMI), Surface Roughness Test, TM0177, H2 SERVICE, Ultrasonic, TM0284, IGC- Intergranular Corrosion Test, Salt Spray Test to test Phosphating

Buy Fin and Tube Heat Exchanger in Germany, UK, Australia, Nigeria, Philippines,Korea, Qatar, UAE, USA, Malaysia, Singapore, Vietnam, Saudi Arabia, Indonesia at dealer price, ask for a free sample now!

High Finned Tubes Diameters

Base tube diameters

Inchmm
5/8″
3/4″
1″
1 1/4″
1 1/2″
1 3/4″
2″
15,88
19,05
25,40
31,75
31,75
44,40
50,80

fin-heights

Inchmm
3/8″
1/2″
5/8″
9,55
12,70
15,8

Number of fins

Inchmm
3/8″
1/2″
5/8″
9,55
12,70
15,8

Design styles of Finned Tubes

Low Finned Tubes

Low Finned Tubes

Applied Finned Tubes

Applied Finned Tubes

Formed Tubes

Formed Tubes

High Finned Tubes

High Finned Tubes

Enhanced Surface Tubes

Enhanced Surface Tubes

Finned Tube Heat Exchanger Dimensions

Finned Tube Heat Exchanger Dimensions

Formed Tubes Sizes

Type Description Base tube
O.D. (mm)
Fin specification (mm)
Fin pitch Fin height Fin thick
Embedded G-type fin tueb 16-63 2.1-5 <17 ~0.4
Extruded Single metal combined metal 8-51 1.6-10 <17 0.2-0.4
Low fin tube t-type fin tube 10-38 0.6-2 <1.6 ~0.3
Bamboo tube corrugated tube 16-51 8-30 <2.5 /
Wound l/kl/ll type fin tube 16-63 2.1-5 <17 ~0.4
String String fin tube 25-38 2.1-3.5 <20 0.2-0.5
U-type U-type tube 16-38 / / /
Welding HF-welding fin tube 16-219 3-25 5-30 0.8-3
H/HH type fin tube 25-63 8-30 <200 1.5-3.5
Studed fin tube 25-219 8-30 5-35 φ5-20

Finned Tube Condenser Material

  • Base tube: Carbon steel, Cupro Nickel, Copper, Aluminium, Stainless steel, Alloy Steel
  • Fin: Stainless steel,Carbon steel, Copper, Aluminium
  • Rings: Aluminium, Carbon steel, Hot dip galvanizing

Finned Tube Standard

Carbon Steel SA 179 / A 179
Carbon Steel SA 210 / A 210
Carbon Steel SA 334 / A 334
Stainless Steel SA 213 / A 213
Duplex Stainless Steel SA 789 / A 789
Copper & Cu Alloys SB 111 / B 111
Titanium & Ti Alloys SB 338 / B 338

Price List of Finned Tubes

Products Price
Carbon steel finned tubes coil heat exchanger $10 Per Meter
High Precision Aluminum Fin Tube Fold for Heat Exchanger $4.90 Per Kg
High frequency welded longitudinal finned tube $15 Per Meter
Welded spiral serrated finned tube $15 Per Meter

Many Aluminium Finned Tubes importers, dealers, traders, stockholders, distributors, retailer, suppliers, wholesaler, stockist, exporters, prefer to buy Serrated Fin Tube from Vishal Steel India and supply High Finned Tubes in their own countries with higher margins, so buy directly from Vishal Steel India to save your cost, contact us for a free quote !!!

Wide selection of Stainless Steel Integral Finned Tubes and Brass Spiral Fin Tube for heat transfer, check Copper Microfin Tubes price in India

Finned Tube Types

Finned Tube

Finned Tube

Finned Tubes

Finned Tubes

Fin Tube Boiler

Fin Tube Boiler

Finned Stainless Steel Tubing

Finned Stainless Steel Tubing

Boiler Fin Tube

Boiler Fin Tube

Integral Finned Tubes

Integral Finned Tubes

Finned Tube Condenser

Finned Tube Condenser

Finned Tube Heat Exchanger

Finned Tube Heat Exchanger

Fintubes

Fintubes

Fin and Tube Heat Exchanger

Fin and Tube Heat Exchanger

Finned Heat Exchanger

Finned Heat Exchanger

Extruded Fin Tube

Extruded Fin Tube

Longitudinal Finned Tube

Longitudinal Finned Tube

Spiral Fin Tube

Spiral Fin Tube

Finned Aluminum Tubing

Finned Aluminum Tubing

Embedded Fin Tube

Embedded Fin Tube

Low Fin Tubes for Heat Exchangers

Low Fin Tubes for Heat Exchangers

Finned Pipe Heat Exchanger

Finned Pipe Heat Exchanger

Internally Finned Tubes

Internally Finned Tubes

Aluminium Finned Tubes

Aluminium Finned Tubes

Copper Fin Tube Boiler

Copper Fin Tube Boiler

Serrated Fin Tube

Serrated Fin Tube

High Finned Tubes

High Finned Tubes

Microfin Tubes

Microfin Tubes

Finned Tube Thickness

Fin material N° fins per meter Strip thickness Production capacity
All type of material From 50 to 500 From 0,4mm. to 0,5mm. More than 500 meters per day
Tube material Tube thickness O.D. tube Lenght available
All type of material 1,00mm. minimum From 10,00mm. to 200,00mm. All lenghts up to 8 Meters

Finned Tube Surface Area Calculator






0.00
ft2 per tube
0.00
in2 per tube
0.00
in2/in of length

Different Production Techniques Of Embedded Fin Tube

  • "G" fin
  • “Crimped” Fin
  • "KL" fin
  • “LL” Fin
  • "L" fin
  • “Extruded” Fin

Maximum Working Temperature of Aluminium Finned Tubes

Maximum Working Temperature 150°C

High Finned Tubes Inspections and Tests

  • Chemical Composition
  • Mechanical Properties
  • Hydrostatic Test
  • Pneumatic Test
  • Boroscopic Inspection
  • Eddy Current Test
Brass Finned Tube Heat Exchanger and Aluminium Extruded Fin Tube mainly used in boiler economizers, coolers, biomedical, heat exchangers, heaters, cryogenic and aerospace applications

'LL' FINNED TUBE Tech chart

MAXIMUM WORKING TEMPERATURE 180°C
ATMOSPHERIC CORROSION RESISTANCE HIGH
MECHANICAL RESISTANCE LOW
FIN MATERIALS ALUMINIUM, COPPER
TUBE MATERIALS ANY THEORETICAL LIMIT

Welded Finned Tubes Specs

TUBE SIZES 3/4" O.D. TO 8" NPS (8.625" O.D.)
FIN HEIGHTS 3/8" TO 1 1⁄2"
FIN THICKNESS 20 GA. (.035") TO 12 GA. (.102") SEGMENTED WIDTH: 4.5MM OR 8MM
SEGMENT WIDTH 4.5MM OR 8MM
FIN PITCH 1 TO 7 FINS PER INCH
MATERIAL ANY MATERIAL OR COMBINATION THAT CAN BE RESISTANCE OR ARC WELDED.

Application of Applied Finned Tubes

  • Mechanical Purpose
  • Oil and Gas
  • Water Line
  • Ship Building
  • Fluid Transportation
  • Drilling and Minning
  • Idlers and Conveyors
Manufacturing different types of Stainless Steel Fintubes including Longitudinal Finned Tube, Serrated, High Finned, Internally Finned, and Embedded Fin Tube in Mumbai

Enhanced Surface Tubes Advantages

  • Increase Heat Transfer Rate
  • Improve Heat Transfer Coefficient
  • Increase Outside Surface Area
  • Transferring heat from a hot fluid into a colder fluid

Copper Fin Tube Boiler Wall thickness

Wall thickness 0.91mm up to 4mm

Stainless Steel Finned Tube Fin Density

Fin Density 3 to 9 fins/inch

No. of Fins per Inch of Brass Finned Tube Heat Exchanger

No. of Fins per Inch 19, 26, 28, 32 FPI

Carbon Steel Fintubes Length

Length Max. Up to 20 Mtrs.